Posted in

What is an amorphous core?

What is an Amorphous Core?
If you’ve ever stood inside a substation or wondered how your laptop charger turns grid electricity into the right voltage for your device, you’re interacting with a transformer— and more than likely, an amorphous core is part of that system. I’ve been an amorphous core supplier for 12 years, and over that time, I’ve found most engineers, even those deep in power electronics, don’t quite grasp what makes an amorphous core different from the silicon steel cores they’ve worked with for decades. Let me break this down, not with dense jargon, but with the practical context I’ve learned on the job. Amorphous Core

At its most basic, an amorphous core is a type of magnetic core made from a metallic alloy that lacks a crystalline structure. Unlike common materials such as silicon steel, which have ordered, repeating atomic patterns, the atoms in amorphous metal are frozen in a random, glass-like arrangement. That difference in structure is the foundation of everything that makes amorphous cores valuable—especially for power applications where energy efficiency isn’t just a nice-to-have, it’s a requirement.

The manufacturing process for amorphous cores is where that random atomic structure comes from, and it’s a method most people outside metalworking rarely hear about. It’s called melt spinning. You start with the desired alloy—usually a mix of iron, boron, and silicon, sometimes with small amounts of other elements to tweak performance—and heat it until it’s fully molten, turning it into a liquid. Then, you shoot that liquid at high speed onto a rotating copper wheel, chilled to near cryogenic temperatures. The liquid cools in just a few millionths of a second, faster than the atoms can arrange themselves into a crystal. The result is a thin, ribbon-like strip of amorphous metal, often just 25 to 30 micrometers thick (about a third the thickness of a human hair). To make a core, we stack these ribbons into the shape needed—usually a toroid, a cut core, or a stack for distribution transformers—then anneal it slightly to relieve stress, without restoring any crystal order.

Now, why does that structure matter? For magnetic cores, the key performance metric is core loss. When you run an alternating current through a transformer’s coil, the core’s magnetic material has to flip its magnetic poles back and forth thousands of times per second. That flipping generates two main types of loss: hysteresis loss and eddy current loss. Silicon steel, which has a crystalline structure, has built-in “grain boundaries” where disorganized groups of atoms meet. As the magnetic field changes, these grain boundaries have to move and realign, which takes energy and creates hysteresis loss. The ordered crystal structure also lets eddy currents—small loops of electrical current induced by the changing magnetic field—flow more easily, leading to extra eddy current loss.

Amorphous metal cuts both losses dramatically. The random atomic structure of an amorphous core means there are no distinct grain boundaries to cause hysteresis loss; that number drops to almost a third of what it is for silicon steel, in most cases. The thin ribbon form also limits eddy currents—any current that tries to flow is restricted to a single ribbon, so the total loss is far lower than in thicker silicon steel cores. For power transformers, that translates to 30 to 50 percent less total core loss compared to traditional silicon steel cores. Let me give you a real example: a 100 kVA distribution transformer with an amorphous core might have core losses of just 150 watts, while an equivalent silicon steel core model could be over 300 watts. Multiply that by thousands of transformers across a grid, and the energy savings add up to millions of dollars annually, not to mention a massive reduction in carbon emissions.

Over the years, I’ve seen amorphous cores go from a niche, expensive option for specialized aerospace or military applications in the 1970s to a mainstream solution for distribution transformers, EV chargers, and renewable energy inverters. That shift has come from two big factors: manufacturing costs coming down and demand for efficiency growing. For a long time, the melt spinning process was slow, and the ribbons were delicate, so cores were only used where efficiency was non-negotiable, like satellite power systems. But in the 2000s, manufacturers scaled the process, developed ways to stack and anneal ribbons without damaging them, and brought costs within reach for utility companies and consumer electronics makers. Now, as countries implement stricter energy efficiency standards—like the EU’s Eco Design Directive, or the U.S. Department of Energy’s new rules for distribution transformers—amorphous cores are the go-to choice for anyone looking to meet those rules without sacrificing performance.

But amorphous cores aren’t perfect, and as a supplier, I always tell potential customers that they aren’t a one-size-fits-all replacement for silicon steel. Let’s be honest about the tradeoffs. First, while core loss is much lower, amorphous metal has a lower saturation flux density than silicon steel. Saturation is the point where a magnetic core can’t hold any more magnetic field, and it starts to lose effectiveness. That means for very high-power applications, like large step-up transformers for power plants, silicon steel might still be a better fit, since it can handle more magnetic flux without saturating. Second, amorphous cores can be more brittle than silicon steel. If you drop a finished core or mishandle it during assembly, there’s a higher risk of the thin ribbons cracking or delaminating. Third, the initial material cost, per kilogram, is still slightly higher than silicon steel, though that gap has shrunk a lot and is almost always offset by the energy savings within 2 to 3 years of operation.

Another common misconception I run into: amorphous cores only work for power transformers. That’s not true. We supply cores for a huge range of applications now. Electric vehicle (EV) on-board chargers, for example, use high-frequency transformers—because they run at higher frequencies, core loss becomes even more critical, and amorphous cores’ low loss makes them smaller and more efficient. Renewable energy inverters, both for solar and wind, rely on amorphous cores to convert the variable DC power from panels or turbines into stable AC for the grid. Even inductors for data centers, where servers run 24/7 and energy waste turns into excess heat, use amorphous cores to cut down on cooling costs and electricity use.

What I’ve learned most in this industry is that choosing a core isn’t just about the material—it’s about matching the core to the application. A small, low-power transformer for a consumer appliance might be better served by a cost-effective silicon steel core, but a 10,000 kVA distribution transformer in a hot, high-usage area will almost certainly pay for itself in 18 to 24 months with an amorphous core. That’s why as a supplier, we don’t just sell cores—we work with customers to walk through their use case: what’s the power rating? What’s the operating frequency? What efficiency standards do they need to meet? We even offer custom core shapes, because we’ve designed toroids, cut cores, and stacked cores for everything from medical device power supplies to offshore wind farm equipment.

Looking ahead, the demand for amorphous cores is only going to grow. As more countries phase out fossil fuels, EV adoption accelerates, and data centers expand, every part of the power system needs to be more efficient. The International Energy Agency estimates that global electricity demand will rise by 30 percent by 2050, and cutting losses in transformers and power electronics could reduce that demand by up to 10 percent. Amorphous cores are one of the most impactful technologies to hit that goal.

If you’re working on a project that could benefit from lower energy loss, or if you’re looking to upgrade your current transformer or power electronics design with a more efficient core, I’m here to help. We supply custom and standard amorphous cores for a wide range of industries, and our team can walk you through sizing, cost, and any questions you have about handling or installation. Reach out to our team to start a conversation about how an amorphous core can improve your system’s efficiency and performance.

NiZn Ferrite Core References

  1. McHenry, M. E., et al. (2003). Amorphous and Nanocrystalline Materials for Electrical Applications. Journal of Materials Science, 38(11), 2261-2284.
  2. U.S. Department of Energy. (2021). Energy Efficiency Standards for Distribution Transformers: Final Rule.
  3. Luborsky, F. E. (1983). Amorphous Metallic Alloys for Magnetic Applications. IEEE Transactions on Magnetics, 19(3), 1521-1530.
  4. European Commission. (2020). Eco Design for Energy Using Products: Transformer Efficiency Requirements.
  5. Davies, H. A. (1976). The Melt Spinning Process and Amorphous Metals. Journal of Materials Science, 11(10), 1173-1192.

Shaanxi Magason-Tech Electronics Co., Ltd.
Shaanxi Magason-Tech Electronics Co., Ltd. is one of the most professional amorphous core manufacturers and suppliers in China. If you’re going to buy high quality amorphous core at competitive price, welcome to get free sample from our factory. Also, customized service is available.
Address: Room #1901, Building No.D, Chanba Financial Center, No.2566 JinQiao 2nd Road, Chanba District, Xi’an City, Shaanxi Province. Zip Code: 710032
E-mail: sales@magason-tech.com
WebSite: https://www.magason-tech.com/